The 7.25” fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius.
If you have a Fender guitar or re-issue from the 1950's-60's or 70's, this is your nut! A 7.25" radius, work with a curved or flat bottom and permanently lubricated for great tuning stability. It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom.
It is pre-slotted to make for a quick and easy install.
Specification:
| Measure | Length | Width | Height | E to E |
| inches | 1.700" | 0.130" | 0.213" | 1.390" |
| mm | 43.18 | 3.30 | 5.41 | 35.31 |
